Pedal Sensors (PAS)

Universal Pedal Sensor

£30

The universal pedal sensor comes with a magnet disc, arm and pedal sensor which is suitable for ANY crank (e.g. including Hollowtech).

If the gap between your bike's pedal arm and frame is 4mm or more, use the regular spacers. For a gap between 2mm and 4mm, use the thin spacer set. If the gap is less than 2mm, the magnetic disc can be used without spacers, but the arm must be used to secure it in place.

Compatibility

AIR, ECO, GO, MAX, PRO

You might also like

OLED Display

£60

Inline Brake Sensor (x2)

£30

Find the In-line Brake Sensor manual here.

Twist Throttle

£29

Our throttle is compatible with all Swytch Kits and fits by sliding onto your handlebars. They're compatible with most standard handlebars, except drop bars.   When you’re not pedalling, the throttle activates in “walk mode,” providing a gentle push at a speed of up to 6 km/h - perfect for starting off after stopping at a traffic light.   While pedalling, engaging the throttle boosts the motor power to PAS level 5. This is particularly helpful when you’re riding in a battery-saving mode (e.g. PAS level 1) and approaching an incline, providing an instant power boost. Find the Twist Throttle manual here.

LED Display

£30

Universal Magnetic Disc

From £10

If the gap between your bike's pedal arm and frame is 4mm or more, use the regular spacers. For a gap between 2mm and 4mm, use the thin spacer set. If the gap is less than 2mm, the magnetic disc can be used without spacers, but the arm must be used to secure it in place.

Arm Upgrade For Standard Pedal Sensor

£6

Standard 2-Piece Pedal Sensor

£20

Universal Pedal Sensor For Bromptons

£35

If your Brompton bike doesn't fall within the range where the Brompton-specific magnetic discs fit, you can use the universal pedal sensor setup instead. If the gap between your bike's pedal arm and frame is 4mm or more, use the regular spacers. For a gap between 2mm and 4mm, use the thin spacer set. If the gap is less than 2mm, the magnetic disc can be used without spacers, but the arm must be used to secure it in place.

Extension Cable/s

From £15

Pedal Sensor For Brompton

£35

If your Brompton bike doesn't fall within the range where the Brompton-specific magnetic discs fit, you can use the universal pedal sensor setup instead. If the gap between your bike's pedal arm and frame is 4mm or more, use the regular spacers. For a gap between 2mm and 4mm, use the thin spacer set. If the gap is less than 2mm, the magnetic disc can be used without spacers. Does not include an arm (optional).